For 26 x 11 x 3 inch full bay intercooler.

For CIS engine.

be able to install on a engine with CIS injection.

1/ A/C condensor must move to left rear wheel wall.
2/ convert to 965 turbo style diverter valve with 965 turbo 90 degree hose.
3/ use 965 turbo style turbo inlet pipe or you will need a short pipe with silicone hose  to
connect.
4/ the air nipple for waste gate. Most of the turbocharger compressor housing has the air
nipple to open the waste gate. I will have a tab weld on the turbo to intercooler pipe drill and
tap the tab.
5/ I will include aluminum stick you will need to bend and drill for the tail style you have.

6/ place a magazine between the fan housing and intercooler so it won't damage the
intercooler fin.

7/ try to close the tail to see how much room you have to mount the intercooler.

8/ to get more cooling for the intercooler, place the intercooler as far back as possible the
cold air will draw through by engine cooling fan.

9/ bend and drill the aluminum stick.
For 3.2 Carrera intake manifold.
6/ Pre fit the 90 degree aluminum pipe, cut the extra length.
2/ place a magazine between the fan housing and intercooler so it won't damage the
intercooler fin.

3/ try to close the tail to see how much room you have to mount the intercooler.

4/ to get more cooling for the intercooler, place the intercooler as far back as possible the
cold air will draw through by engine cooling fan.

5/ bend and drill the aluminum stick.